How To Clean A Nail Stamping Plate

Contents

1 What To Do if Your Nail Stamper is Stained
- 1.1 Clear Nail Art Stamper Silicone Stamping Heads Clear Jelly Stamper (1-Replacement Piece / 2.8 cm)
- 1.2 What to Do If Your Clear Stamper Is Cloudy
- 1.3 How to Clean a Clear Gel Stamper
- 1.4 How to Clean a Non-Gel Stamper
- 1.5 How to Load the Stamper Plate
- 1.6 Applying a Stamp
- 1.7 Clean the stamper head with packing tape or a sticky lint roller
- 1.8 How to Prepare a Nail Stamper
- 1.9 How to Successfully Master Nail Stamping
- 1.10 Conclusion

What To Do if Your Nail Stamper is Stained

Clean Nail Stamper & Stamping Plates can be stained easily , one could use cotton pads soaked in 100% acetone and swipe the stamping plates using the soaked cotton pads. To guarantee proper cleaning and preservation of the nail stamper, one should avoid using polish remover that has been mixed with a variety of chemicals.

The nail stamper cannot be cleaned well if the nail polish is mixed with chemicals such as moisturizers and oils. Additionally, one can use a sticky stamper solution or scotch tape. Alternatively, one can also use a cloth with soap to clean the stamper.

Clear Nail Art Stamper Silicone Stamping Heads Clear Jelly Stamper (1-Replacement Piece / 2.8 cm)

What to Do If Your Clear Stamper Is Cloudy

Continuous use of acetone to clean the stamper makes it appear cloudy, and the main problem is that it cannot be reversed; thus, the only alternative is to get a new stamper. The change is irreversible since the silicon head has had a permanent reaction with chemicals used to clean the stamper.

How to Clean a Clear Gel Stamper

The best way to clean a clear stamper is to use either alcohol or nail polish on the clear stamper, although a small amount of acetone can also be used on the nail polish remover. A sticky pad is also used to clean the stamper head. The most vital detail is choosing the right nail polish remover to avoid any damages. An office scotch tape is also ideal in cleaning the stamper.

How to Clean a Non-Gel Stamper

For a non-gel stamper, one can wash it in soapy water and later dry it with a clean piece of towel. A lint roller can also be used, but one has to be careful not to use a sticky lint roller as it can either damage or rip the stamper. The stampers should be cleansed after each and every use.

How to Load the Stamper Plate

Loading a stamper involves placing an image into a stamper. First, apply a thin layer of stamping polish to an image that one selects on the stamping plate. Any excess nail polish should be scrapped off while holding the scraper at a suitable angle, such as a 45-degree angle which allows for proper cleaning. The stamper should then be rolled on over the image lightly.

To guarantee that the transfer of the image is smooth, flicking the wrist slightly is advisable. One should ensure that the image is crisp to guarantee that the image transfers smoothly and evenly. In a case, that extra nail polish comes together with the image, gently cleaning it using a piece of tape, a lint roller, or scraper. After confirming the image is proper, apply the stamper on the nail gently.

Applying a Stamp

The application of the stamp mainly depends on whether the stamper plate has been loaded well. In a case where the plate is well loaded, the stamp application becomes more straightforward as it involves applying the image on one's nails. The application should be done fast to ensure that the nail polish dries on the nail stamper.

Clean the stamper head with packing tape or a sticky lint roller

There are three key ways through which one can clean a nail stamper head. The first is using a maniology sticky stamper station which includes a multi-purpose tool where the paper front acts as a manicure planner and a notepad for polish ideas. Still, its main application is derived from its written peel.

After peeling the paper, one can find a sticker whose role is to help clean excess nail polish from the stamper head. Secondly, one can also use a sticker lint roller as it has some form of stickiness that allows for getting the nail polish off. The sticky lint roller is usable as long as it has a sticky surface. Lastly, one can also use scotch tape, which is ideal and straightforward as it only involves placing the tape on a stamper and taking it off after some time. Cleaning the head stamper is a simple process no matter what method is selected.

How to Prepare a Nail Stamper

Good preparation of nail stamper is vital for proper application of the nail stamper. Preparation of the nail stamper fists involves first cleaning the gel stamper, which involves getting the stamper head and thoroughly cleaning it, which must feature cleaning the oily residue using soap and water.

After cleaning with soap and water, rinse the stamper head and clean it with a lint-free towel. When dealing with a non-gel stamper, begin by rubbing the stamper head with a nail buffer and then clean it using a cotton ball soaked with pure acetone. Cleaning the stamper plate should be done using a cotton ball soaked in pure acetone. With the stamper plate and the stamping head well cleaned, one is ready to apply the desired stamp.

How to Successfully Master Nail Stamping

Becoming a master nail stamper requires an accurate following of the steps previously highlighted in the article. The initial stages cover the preparation of the nail stampers and all the equipment used. Using clean stamping equipment is critical in ensuring that the stamping is neat and colorful in the end. One begins by preparing their nails, cleaning and filling one's nails, and applying the desired base coat.

The base coat should be evenly spread and perfect to guarantee that the stamping sticks on well. The base coat should dry first before applying the stamps. Next, cleaning the stamper head should be done thoroughly to guarantee no remaining polish from the last use.

The following approach includes cleaning the stamper plate, which ensures that the loading is smooth and there is no excess polish. The next step is loading the stamper head and gently rolling it over one's nails. Once applied, the last step is applying a top layer of clear nail polish.

Conclusion

Nail stamping is a common way of beautifying one's nails, but one must know all the required steps and follow them for their stamping to be successful.